Production process of stainless steel hot water pipe
stainless steel hot water pipe
stainless steel hot water pipe raw material: steel plate cutting, chamfering according to the use needs, easy to use, stainless steel plate chamfering, according to the required shape, specifications, size bending.
forming stainless steel hot water pipe to go through a strict hydraulic test, check whether it meets the requirements of use, whether there is a need to rectify the pipe, after the hydraulic test, clean the stainless steel water supply pipe, so that the surface of the pipe bright, the use of solution heat treatment, quenching, annealing and other methods to reduce the contact between the surface of the pipe and oxygen.
polishing is suitable for stainless steel hot water pipes, which can make the surface smoother, smoother, defect-free, bright as a mirror, and rust-proof. After the stainless steel hot water pipe fittings are polished, laser marking is required, indicating, specifications, and parameters, Then pack and store in categories.
stainless steel is a healthy material that can be implanted into the human body, so for water supply pipelines, choosing stainless steel pipes is very beneficial to health. The soaking water test results show that all indicators meet the requirements of relevant drinking water standards. The inner wall of the stainless steel pipe is smooth, it will not scale for long-term use, it is not easy to be contaminated by bacteria, and there is no need to worry about the impact on water quality, which can eliminate secondary pollution. The correct installation process of
stainless steel hot water pipe
The acceptance of materials and the quality of construction materials will directly affect the construction quality and the hidden dangers caused by poor materials in the future. Strictly check the water pipe before installation.
On-site disclosure, the installation personnel should carefully look at the drawings, confirm the location of water heater, water tank, basin, washing machine and other facilities and equipment, and understand whether the owner or designer has special requirements. If there are special requirements, the construction should be carried out according to the instructions of the owner or design.
pipe cutting, in order to avoid unnecessary waste in the installation process, the installer should measure the length of the pipe required for cutting. The pipe cutting adopts special pipe cutting. The bayonet of the pipe shear should be adjusted to match the cut pipe diameter. During rotary cutting, the force should be uniform. When cutting the pipe, the cross section should be perpendicular to the pipe axis, and the full section of the fracture after cutting should be free of burrs.
pipe connection, water pipe and pipe fittings are connected by hot melt method, which is reliable, easy to operate, good air tightness and high interface strength. Before connection, remove dust and foreign matter on the pipe and accessories. The pipe and pipe fittings are heated by welding machine. The hot melt depth and time of the pipe and pipe fittings shall meet the requirements. Do not rotate during hot melt welding. When connecting with wire fittings, the raw material tape shall be wound, to ensure sealing.
All right, I'll talk about it first. Thank you for watching. We'll see you next time.
Our company specializes in all kinds of stainless steel pipe and "Sanqing" stainless steel pipe fittings production and sales. The company has an annual production capacity of 6000 tons of various types of stainless steel pipes and 5 million stainless steel pipe fittings. The main materials of the products are stainless steel 304, 316, 316L, etc. Main product series: stainless steel water pipe, single pressure pipe fittings, double pressure pipe fittings, socket welding series, grooved pipe fittings, tools and accessories, please contact our company if necessary.