Sanqing
Hebei clamping pipe fittings manufacturers introduce the principle and characteristics of stainless steel clamping pipe fittings
Release time:
2021-01-01 12:04
Source:
Author:
Number of views:
Decoration mainstream water pipes are slowly transitioning from PPR plastic pipes to stainless steel pipes, but for masters who used to install PPR plastic pipes in the past, the installation of stainless steel pressure pipes is a novel connection method and is not familiar with it. Most masters may not be so smooth in the early stages of use. But in fact, the clamping type pipe connection installation is very simple. Seamless installation and use by all end users. Today, Hebei clamping pipe fittings manufacturers will introduce the advantages and principles of stainless steel clamping pipe fittings.
1. Hebei clamping pipe fittings manufacturers analyze the principle of stainless steel clamping pipe fittings
1, stretching principle: the middle position of clamping pipe fittings is small, but both sides are large, with pulling force> 3.0mpa;
2, leak-proof principle: O-ring radially contracts tightly, leakage stops water, plugging stops water;
3. Principle of preventing rotation: use a special card pressure tool to press the card into the hexagon to prevent water leakage from the rotating in use.
2. Hebei clamping pipe fittings manufacturers introduce the characteristics of stainless steel clamping pipe fittings
1. The construction is fast and convenient, and the installation time is only 1/3 of that of traditional pipe fittings.
2. Environmental protection, reliability, economy, long life, maintenance-free.
3. Hebei clamping pipe fittings manufacturers introduce construction precautions
1. stainless steel clamping pipe fittings are thin-walled stainless steel pipe fittings, please avoid rough operation to prevent defects and depressions.
2. Try to avoid direct sunlight and protect with plastic tape or security cloth.
3. When it is stained with oil, it must be plugged in to wipe it clean. In particular, the end of the pipeline and the auxiliary rubber seal should be checked for foreign matter. If there is foreign matter, it should be handled immediately to avoid more serious consequences.
4. If the pipe fitting cannot be inserted into the pipe correctly, it is necessary to confirm whether the burrs on the pipe port are removed, especially whether the burrs on the inner wall are removed. Burr directly affects the connection of pipe fittings and pipes.
5. After the stainless steel clamping attachment is inserted, the pressure will not be jammed temporarily. The thread should be tightened before clamping. Please ensure that the joint under clamping pressure will not loosen due to the rotating thread.
6. Please modify the straight pipe when the pipe is bent. If the accessory parts cannot be corrected, the card pressure may loosen, which is also the cause of leakage.
7. If the card pressure is loose, press the card again under the original card pressure (pay attention to the hexagonal direction).
8. Corrosion protection measures should be considered when the pipeline system is used near the coast or in places with high salt water. In addition, in the well water, sea water, hot spring water, high salt content of the fluid used to pay attention.
Latest News
2023-02-12
