What are the advantages of compression type pipe fittings?
clamping pipe fitting is to insert the thin-walled stainless steel pipe into the socket of clamping pipe fitting , and use a special clamping tool to clamp the stainless steel pipe in the pipe fitting. The cross section of the clamping piece is hexagonal, and there is a O-shaped sealing ring between the stainless steel pipe and the pipe fitting, which makes it leak-proof, stretch-proof, vibration-resistant, and high-pressure resistant.
clamping pipe fittings stand out with many advantages, and the market demand for stainless steel pipes for home decoration is increasing. What are the advantages of clamping pipe fitting that consumers like so much?
First of all, clamping pipe fitting has anti-vibration effect and high connection strength.
Clamping type pipe fittings will encounter some vibration conditions during use, such as house vibration, water hammer vibration, pipeline vibration or seismic vibration. Vibration will cause the pipe to loosen, but the clamped pipe will directly clamp the connection part, avoiding the possibility of loosening.
2 is convenient for construction and operation, and clamp type pipe fitting can avoid on-site welding operation and threading operation.
If welding or threading operations are carried out in the county seat, it is easy to cause environmental pollution and water leakage, and the risk is likely to be greater. The convenience of clamping type pipe fittings is that it only needs to build a large installation, without welding or winding, which greatly shortens the construction period and improves efficiency.
3 is a stainless steel clamp type pipe fitting for home decoration , which can meet the requirements of embedded installation.
greatly reduces the possibility of leakage of sewage pipes in concealed environments, reduces the risk and cost of repairing and replacing new pipe fittings, and can meet the technical requirements set by the state. The joints of the fittings are very tight and do not pose a danger to the installation base.
four is no maintenance update, to avoid the trouble of maintenance.
During the service life of the building, the advantages of economic performance can be maintained, and there is almost no need to update and maintain accessories, saving time and cost. Card accessories can almost make the customer's property damage and service loss to zero.
5 is a clamp type pipe fitting with excellent raw material strength.
The tensile strength of stainless steel used in is two to ten times that of ordinary water pipe materials, and it is not easily affected by water leakage, so can be applied to many industries .
clamp type pipe fitting is stainless steel pipe is clamped in the pipe fitting with a special clamping tool. The cross section of the clamping piece is hexagonal, and there is a O-shaped sealing ring between the stainless steel pipe and the pipe fitting, which makes it leak-proof, stretch-proof, vibration-resistant, and high-pressure resistant. Therefore, it is a good connector for direct drinking water systems, tap water systems, heating systems, steam systems, industrial tubing systems and industrial air piping systems. It is suitable for the connection of water, oil, gas and other pipelines.
above are some knowledge points about clamping pipe fittings. I hope you can seriously study and understand the relevant knowledge and choose the products suitable for your needs.